many redundant images.
Note: This option is invalid if Mode is set
as "Time Lapse".
Select the sensitivity of the PIR sensor.
Temperature affects the sensitivity. The
High setting is suitable when you want to
capture distant objects or capture more,
and the Low setting is good for less false
trigger.
Note: this option is invalid if Mode is set
as "Time Lapse".
Selecting On will activate the side motion
sensors. It brings faster trigger speeds and
helps capture fast moving animals. When
any of the two side motion sensors detects
a motion event, the camera will be
pre-activated. While the animal enters the
detection area of the center motion sensor,
the camera will start taking photos or
videos. Select Off to save batteries power.
This feature helps you aim the camera at
your target area. Please refer to the details
in Section 9.2.
Set the earliest shot time after Time Lapse
or Hybrid mode is enabled. If you would
like to get photos earlier, it is
recommended to set it later than the
current time.
Interval:
optional
from 3s to
24h
Set timelapse interval. It takes effect
ONLY when Mode is set as Time Lapse
or Hybrid, the camera will automatically
take photos/videos according to the set
To Next Page
Loading...
