interval, regardless of whether the PIR
sensor has detected any game. This is
helpful when observing cold-blooded
animals like snakes, or the process of
flowering, etc.
Note: This option is invalid if Mode is set
as "Motion Detection".
Selecting On to set a specific working
time period for your camera in Time
Lapse mode or Hybrid mode. You can set
up to 2 different time periods for the
camera, and it will not capture time-lapse
photos or videos outside of those periods.
Note: This option is invalid if Mode is set
as "Motion Detection".
M – Month, D – Day, Y – Year
hh – Hour, mm – Minute
Note: Use "LEFT/RIGHT" key to switch
parameters, use "UP/DOWN" to set
current date and time. Date input format
may change. Please refer to "Date
Format" parameter settings accordingly.
Select date format which will be shown on
the screen and each capture.
Select time format which will be shown
on the screen and each capture.
12h - AM/PM
Select On to assign a name, 4-character
long, in the form of Capital A-Z, 0-9 to
record the location in the photos (e.g.
A123 for Yellow Stone Park). This helps
To Next Page
Loading...
