multi-camera users identify the location
when reviewing the photos.
Select On to show date, time, temperature,
moon phase on each capture.
Selecting On option will cause the oldest
files to be overwritten with new captures
when the
memory
card reaches its
capacity. With Off option selected, the
camera will stop capturing images once
the
memory
card reaches capacity.
Select On if you only want the camera to
work within a specified time period every
day. For instance, if the starting time is set
at 18:35 and the ending time at 8:25, the
camera will function from 18:35 the
current day to 8:25 the next day. Outside
the time period the camera will not be
triggered.
Note: This option is ONLY valid if Mode
is set as "Motion Detection" .
Set up a 4-digit password to protect your
camera from unauthorized users. If the
code is lost, you can contact customer
support to reset the password.
All files will be deleted after formatting
the
memory
card. Caution: make sure
wanted files on the memory card have
been backed up first!
Selecting Yes will return all your previous
settings back to the manufacturer default.
Display the version of the camera.
To Next Page
Loading...
