Garland XPG24 User Manual

10 Part #: GAR_IOM_ 4532522 Rev 08—6/17
Section 1
General Information
Read This Manual
Garland Commercial Equipment developed this manual as
a reference guide for the owner/operator and installer of
this equipment. Please read this manual before installation
or operation of the machine. A qualified service technician
must perform installation and start-up of this equipment,
consult Section 5 within this manual for troubleshooting
service assistance.
If you cannot correct the service problem, call your Service
Agent or Distributor. Always have your model and serial
number available when you call.
Your Service Agent ____________________________
Service Agent Telephone Number _________________
Your Local Distributor ___________________________
Distributor Telephone Number ____________________
Model Number _______________________________
Serial Number ________________________________
Installation Date ______________________________
Unit Inspection
Thoroughly inspect the unit upon delivery. Immediately
report any damage that occurred during transportation
to the delivery carrier. Request a written inspection report
from a claims inspector to document any necessary claim
Model Numbers
This manual covers the following models:
XP(E/G)12
XP(E/G)24, XP(E/G)24-1(L/R)
XP(E/G)36, XP(E/G)36-1(L/R), XP(E/G)36-2(L/R)
XP G 36 - 2 L
Model Prex
Upper Platen
* see note
1, 2
Starting to:
R: Right
L: Left
Type
12in, 24in, 36in
Grill plate width
* Sux not used if all platens included
XPress
G: Gas
E: Electric
Serial Plate Numbers
The serial plate is affixed to the lower left corner of the
right panel and a serial sticker on front edge of the chassis.
Important information such as the unit’s model number,
serial number, and electrical/gas specifications can be
found on the serial plate. Serial plate is located is manual
covers the following models:

Garland XPG24 Specifications

General

Brand	Garland
Model	XPG24
Category	Grill
Language	English