48 Document: GAR_SM_4601777 (4/16)
Maintenance Section 4
Daily Cleaning
1. Select Clean mode for
each platen and, once
Clean mode has been
reached, turn each zone
OFF and turn
NOTE: Turn main switch OFF
when cleaning platens.
2. Wipe release material
sheet with a clean,
sanitizer-soaked grill
cloth.
3. Lower platen and
remove the locking clips,
the U bar and release
sheets. Wash, rinse and
set aside locking clips
and U bar. Set release
sheet aside for further
cleaning.
4. Scrape the lower grill
surface with the scraper.
Use the grill squeegee
to push residual grease
into trough. Wash and
rinse the squeegee and
scraper.
5. Remove the grease
buckets from each side.
6. Remove the lower
support rail of the grease
troughs from each side.
7. Pour Hi-temp Grill
cleaner into a bucket or
stainless steel pan.
8. Put on the heat-resistant
gloves and safety
glasses.
9. Dip the Grill Cleaning
Pad & Handle into the
grill cleaner. Never use a
steel scraper to clean the
platens.
10. Apply the grill cleaner
to front side of platens
starting from right
platen to left platen.
DO NOT SCRUB.
To Next Page
Loading...
Need help?
General
