Garmin Alpha 300 - Getting Started; Setting Up the Alpha System; Device Overviews

Getting Started
WARNING
See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
Setting Up the Alpha System
Before you can use the Alpha system, you must set up the devices.
1 Charge the handheld device (Charging the Handheld Device, page4).
2 Charge the dog collar device (Charging the Dog Collar Device, page5).
3 Turn on the devices (Turning On the Device, page5).
4 Select a language (Selecting a Language, page5).
5 If necessary, pair the dog collar device with the handheld device (Methods to Add a Dog Collar Device to a
Handheld Device, page7).
6 If necessary, calibrate the compass on the handheld device (Calibrating the Compass, page32).
Device Overviews
Alpha Handheld Device
NOTICE
Avoid using a high-powered radio (greater than 5 W) in close proximity to the handheld device. It may cause
irreversible damage to the handheld device.
Getting Started 1