Garmin eTrex Legend H User Manual

eTrex Legend H and eTrex Vista H Owner’s Manual 37
Main Pages
2. Hold the Vista H level to
get an accurate electronic
compass reading.
To set the speed and time for
Compass Auto On and Off:
1. Press MENU twice > Setup.
2. Select Heading.
3. Select Switch to compass
heading when below.
4. Use the numeric keypad to
enter a speed.
5. Select for more than to set
the time delay from the time
options list.
Calibrating the
Electronic Compass
Calibrate the electronic compass
outdoors when you rst use the
Vista H. To ensure continued
accuracy, calibrate after installing
new batteries, after moving
more than 100 miles (160 km),
or experiencing a temperature
change greater than
68º F (20º C) from the last
calibration. The accuracy of
the electronic compass is also
adversely affected if the unit is
not held level or you are near
objects that affect magnetic
elds, such as cars or buildings.
To calibrate the electronic
compass (Vista H only):
1. While outdoors, hold the Vista
H level and do not stand
near objects that inuence
magnetic elds, such as cars,
buildings, or overhead power
lines.
2. Press MENU > Calibration.

Garmin eTrex Legend H Specifications

General

Brand	Garmin
Model	eTrex Legend H
Category	GPS
Language	English