Garmin G950 - Page 216

Garmin G950 Pilot’s Guide for the Pilatus PC-6
190-00870-02 Rev. A204
FLIGHT MANAGEMENT
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
DEPARTURE (DP)
A Departure Procedure (DP) is loaded at the departure airport in the flight plan. Only one departure can
be loaded at a time in a flight plan. The route is defined by selection of a departure, the transition waypoints,
and a runway.
Figure 5-68 Departure Loading Page - Selecting the Departure
Departure Airport
Selected Departure
Departures Available at
KMKC
Departure Waypoint
Sequence
Preview of Selected
Departure
Loading a departure procedure into a stored flight plan:
1) Select a stored flight plan from the Flight Plan Catalog Page.
2) Press the EDIT Softkey; or press the MENU Key, select ‘EDIT FLIGHT PLAN’, and press the ENT Key. The Stored
Flight Plan Page is displayed.
3) Press the LD DP Softkey; or press the MENU Key, select “Load Departure”, and press the ENT Key. The
Departure Loading Page is displayed.
4) Select a departure. Press the ENT Key.
5) Select a transition for the selected departure. Press the ENT Key.
6) Select a runway served by the selected departure, if required. Press the ENT Key.
7) Press the ENT Key to load the selected departure procedure.