Garmin G950 - Page 32

Garmin G950 Pilot’s Guide for the Pilatus PC-6
190-00870-02 Rev. A20
SYSTEM OVERVIEW
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
5
Joystick Turn to change map range
Press to activate Map Pointer for map panning
Moves the Quick Select Box or cursor on the Active Flight Plan Page on the MFD when joystick
is moved left, right, up, or down.
6
CRS/BARO Knob Turn large knob for altimeter barometric pressure setting
Turn small knob to adjust course (only when HSI is in VOR or OBS Mode)
Press to re-center the CDI and return course pointer directly TO bearing of active waypoint/
station
7
COM Knob Turn to tune COM transceiver standby frequencies (large knob for MHz; small for kHz)
Press to toggle cyan tuning box between COM1 and COM2
The selected COM (green) is controlled with the COM MIC Key (Audio Panel).
8
COM Frequency
Transfer Key (EMERG)
Transfers the standby and active COM frequencies
Press and hold 2 seconds to tune the emergency frequency (121.5 MHz) automatically into the
active frequency field
9
COM VOL/SQ Knob Turn to control COM audio volume level (shown as a percentage in the COM Frequency Box)
Press to turn the COM automatic squelch ON/OFF
10
Direct-to Key ( )
Activates the direct-to function and allows the user to enter a destination waypoint and
establish a direct course to the selected destination (specified by identifier, chosen from the
active route)
11
FPL Key Displays flight plan information
12
CLR Key
(DFLT MAP)
Erases information, cancels entries, or removes menus
Press and hold to display the MFD Navigation Map Page (MFD only).
13
MENU Key Displays a context-sensitive list of options for accessing additional features or making setting
changes
14
PROC Key Gives access to IFR departure procedures (DPs), arrival procedures (STARs), and approach
procedures (IAPs) for a flight plan or selected airport
15
ENT Key Validates/confirms menu selection or data entry
16
FMS Knob
(Flight Management
System Knob)
Press to turn the selection cursor ON/OFF.
Data Entry: With cursor ON, turn to enter data in the highlighted field (large knob moves
cursor location; small knob selects character for highlighted cursor location)
Scrolling: When a list of information is too long for the window/box, a scroll bar appears,
indicating more items to view. With cursor ON, turn large knob to scroll through the list.
Page Selection: Turn knob on MFD to select the page to view (large knob selects a page
group; small knob selects a specific page from the group)
17
Softkey Selection
Keys
Press to select softkey shown above the bezel key on the PFD/MFD display
18
ALT Knob Sets the Selected Altitude, shown above the Altimeter (the large knob selects the thousands, the
small knob selects the hundreds)