Garmin G950 - Page 461

190-00870-02 Rev. A
Garmin G950 Pilot’s Guide for the Pilatus PC-6
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
449
APPENDIX A
Message Comments
MFD1 DB ERR – MFD1 multiple
database errors exists.
The MFD and/or PFD detected a failure in more than one database. If problem
persists, the system should be serviced.
PFD1 DB ERR – PFD1 multiple
database errors exists.
DB MISMATCH – Navigation
database mismatch. Xtalk is off.
The PFD and MFD have different navigation database versions or regions installed.
Crossfill is off. Check the AUX-SYSTEM STATUS Page to determine versions or regions.
Also, check the AUX-SYSTEM STATUS Page for a database synchronization function
not completed. After synchronization is complete, power must be turned off, then on.
DB MISMATCH – Standby Navigation
database mismatch.
The PFD and MFD have different standby navigation database versions or regions
installed. Check the AUX-SYSTEM STATUS Page to determine versions or regions.
Also, check the AUX-SYSTEM STATUS Page for a database synchronization function
not completed. After synchronization is complete, power must be turned off, then on.
DB MISMATCH – Terrain database
mismatch.
The PFD and MFD have different terrain database versions or regions installed. Check
the AUX-SYSTEM STATUS Page to determine versions or regions. Also, check the AUX-
SYSTEM STATUS Page for a database synchronization function not completed. After
synchronization is complete, power must be turned off, then on.
DB MISMATCH – Obstacle database
mismatch.
The PFD and MFD have different obstacle database versions or regions installed.
Check the AUX-SYSTEM STATUS Page to determine versions or regions. Also,
check the AUX-SYSTEM STATUS Page for a database synchronization function not
completed. After synchronization is complete, power must be turned off, then on.
DB MISMATCH – Airport Terrain
database mismatch.
The PFD and MFD have different airport terrain database versions or regions installed.
Check the AUX-SYSTEM STATUS Page to determine versions or regions. Also,
check the AUX-SYSTEM STATUS Page for a database synchronization function not
completed. After synchronization is complete, power must be turned off, then on.
NAV DB UPDATED – Active
navigation database updated.
System has updated the active navigation database from the standby navigation
database.
TERRAIN DSP – [PFD1 or MFD1]
Terrain awareness display unavailable.
One of the terrain, airport terrain, or obstacle databases required for TAWS in the PFD
or MFD is missing or invalid.
GMA 347 MESSAGE ADVISORIES
Message Comments
GMA1 FAIL – GMA1 is inoperative. The audio panel self-test has detected a failure. The audio panel is unavailable. The
G950 system should be serviced.
GMA1 CONFIG – GMA1 configuration
error. Config service req’d.
The audio panel configuration settings do not match backup configuration memory.
The G950 system should be serviced.
MANIFEST – GMA1 software
mismatch. Communication halted.
The audio panel has incorrect software installed. The G950 system should be
serviced.
GMA1 SERVICE – GMA1 needs
service. Return unit for repair.
The audio panel self-test has detected a problem in the unit. Certain audio functions
may still be available, and the audio panel may still be usable. The G950 system
should be serviced when possible.