Page 3-40 G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air
Revision 1 190-00716-01
1. With the loader card in the top slot of PFD1 and PFD1 in configuration mode, select the “SYSTEM
UPLOAD” page using the small FMS knob on PFD1.
2. Activate cursor and rotate the small FMS knob to display drop down menu. Highlight King Air - Options
and press ENT key on PFD1.
3. Rotate the small FMS knob to highlight “FDR Option”. Press ENT key on PFD1.
4. Verify “FDR Option” is displayed in the “Item” window. Press “LOAD”.
Figure 3-37, FDR Configuration
5. Monitor load progress. Verify software load completes without errors as indicated by the following:
• Green “PASS” in Configuration column for AIRFRAME, MANIFEST, and GSD 1.
• Green “PASS” in software column for GSD 1.
• “Upload Complete………….COMPLETE” in the summary box.
6. Press ENT key on PFD1 to acknowledge upload complete.
7. Deactivate cursor.
8. On the MFD, verify that the GSD software part number and version matches the information in
G1000/GFC 700 AFCS, King Air 300/B300, 005-00629-02, General Arrangement drawing.
To Next Page
