Garmin GPSMAP 4008 - Making an Individual Routine Call to an AIS Target

100 GPSMAP
®
4000/5000 Series Owner’s Manual
Digital Selective Calling
1. From the Home screen, select  > .
2. Select a vessel or a station to call.
3. Select  >  > .
The chartplotter sends information about the call to the radio.
4. On your Garmin VHF radio, select .
Making an Individual Routine Call to an AIS Target
When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, you can use
the chartplotter interface to set up an individual routine call to an AIS target. Before you start the call, you can
select a DSC channel other than the default channel, channel 72 (page 99).
1. From the Home screen, select .
2. Select a chart or a 3D chart view.
3. Complete an action:
• For the GPSMAP 4000 series, use the  to select an AIS target .
• For the GPSMAP 5000 series, touch an AIS target .
4. Select  >  > .
The chartplotter sends information about the call to the radio.
5. On your Garmin VHF radio, select .