Garmin GPSMAP 5215 - Page 24

20 GPSMAP
®
4000/5000 Series Owner’s Manual
Charts and 3D Chart Views
Selecting a Lane Width
You can indicate the width of the navigation lane appearing in Perspective 3D or Mariner’s Eye 3D.
: Mariner’s Eye 3D is available with a preprogrammed BlueChart g2 Vision data card.
1. From the Home screen, select .
2. Select  or .
3. Select  > > .
4. Enter the width.
5. Select .
Showing Surface Radar
The chartplotter must be connected to a marine radar to show surface radar.
You can show radar returns from the surface of the water in Perspective 3D or Mariner’s Eye 3D.
: Mariner’s Eye 3D is available with a preprogrammed BlueChart g2 Vision data card.
Perspective 3D with Surface Radar Information
1. From the Home screen, select .
2. Select  or .
3. Select  > > .
Showing Other Vessels
See “Conguring the Appearance of Other Vessels” (page 58).
Showing and Conguring Data Bars
See “Data Bars” (page 56).
Using Waypoints and Tracks
See “Waypoints” (page 32) or “Tracks” (page 36).