Garmin GPSMAP 5215 - Viewing Video

50 GPSMAP
®
4000/5000 Series Owner’s Manual
Almanac, Environmental, and On-boat Data
Resetting Trip Gauges
1. From the Home screen, select  > .
2. Complete an action:
• Select  to set all the readings for the current trip to 0.0.
• Select  to set the maximum speed reading to 0.0.
• Select  to set the odometer reading to 0.0.
• Select  to set all the readings to 0.0.
Viewing Video
The chartplotter can show video if you are connected to one or more video sources using the supplied video
cable. See the GPSMAP 4000/5000 Series Installation Instructions for details.
From the Home screen, select  > .
Selecting a Video Source
1. From the Home screen, select  >  > .
2. Select .
3. Select  or  to indicate the source of the video feed and display video input.
Conguring the Video Appearance
Before you can congure the video appearance, you must set the video Source setting to Video 1 or Video 2
(page 50).
1. From the Home screen, select  >  > .
2. Complete an action:
• Select> to show the video using a stretched aspect ratio. The video cannot be stretched
beyond the dimensions provided by the connected video device, and it may not ll the entire screen.
• Select  >  to show the video using a standard aspect ratio.
• Select . Select , , or.
• Select  to adjust the color saturation. Select , , or.
• Select . Select , , or.
• Select . Select the source format of the video ( or ). Select  to allow the
chartplotter to select the source format automatically.
Alternating Among Multiple Video Sources
If you have two or more video sources, you can alternate between them using a specic time interval.
1. From the Home screen, select  >  >  >  > .
2. Select the amount of time each video appears.