Where To?
24 GPSMAP 400/500 Series Owner’s Manual
You can store up to 3,000 waypoints with a user-dened name, symbol, depth,
water temperature, and comment for each waypoint.
1. From the Home screen, select > > >
> .
OR
From the Home screen, select > > >
> .
2. Create a waypoint using one of the following:
• —enter the grid coordinates of the new waypoint.
• —use the Rocker to move the pointer to the location where
you want create the waypoint. Press .
• —Create a waypoint at your current location.
From any screen, press the key.
• —designate a specic name, symbol, water depth, or
water temperature.
• —deletes the waypoint.
• —designates the current location as a Man Overboard
location.
• —switches between waypoint information and the
Navigation chart.
: Selecting creates a waypoint only at your present location.
1. From the Navigation chart, use the map pointer ( ) to highlight the
waypoint on the Navigation chart.
OR
From the Home screen, select > > .
2. Select the waypoint you want to edit.
3. Select .
4. Select the waypoint attribute you want to change (, , ,
, , or ).
1. Select the waypoint on the Navigation chart.
2. Select . (The button is only shown when more than one
waypoint is in the vicinity.)
3. Select the button for the waypoint you want to edit.
4. Select .
5. Press to save the new location, or press to cancel the
move.
1. From the Navigation chart, use the map pointer ( ) to highlight the
waypoint on the Navigation chart and press .
To Next Page
Loading...
