Viewing Information
38 GPSMAP 400/500 Series Owner’s Manual
8. From the Home screen on your chartplotter, select >
> .
9. Complete one of the following:
• Select to transfer data from the SD card to the
chartplotter and combine it with existing user data.
• Select to overwrite the data on your chartplotter.
10. Select the le name from the list. The data is transferred from the SD card
to the chartplotter.
1. Insert an SD card into an SD card reader that is attached to the computer.
2. From within HomePort, click the folders or items you want to transfer.
3. Click > .
• Click to export all items in the selected folder.
• Click to export only the selected items.
4. Browse to the location on the SD card where you want to save the le,
select a le format, and type a le name.
5. Insert the SD card into the SD card slot on the front of the unit.
6. From the Home screen on your chartplotter, select >
> .
7. Complete one of the following:
• Select > to transfer data from the SD card to
the chartplotter and combine it with existing user data.
• Select > to overwrite the data on your
chartplotter.
8. Select the le name from the list. The data is transferred from the SD card
to the chartplotter.
1. Insert an SD card into the SD card slot on the front of the unit.
2. From the Home screen, select > >
> .
3. Complete one of the following:
• Select the le name from the list.
• Select to create a new le. Enter the le name using the
and select .
4. Select to save waypoints, routes, and tracks to the SD card. The le
name is saved with an .ADM extension.
1. Insert an SD card into the SD card slot on the front of the unit.
2. From the Home screen, select > > .
If your unit is NMEA 2000 compatible, select instead of
.
To Next Page
Loading...
