Where To?
28 GPSMAP 400/500 Series Owner’s Manual
From the Navigation or Perspective 3D chart, select >
> > . The track memory is
cleared. The current track continues to be recorded.
1. From the Navigation or Perspective 3D chart, select >
> > .
2. Select either the time the current track began or .
3. Follow the colored line on the screen.
1. From the Navigation or Perspective 3D chart, select >
> .
2. Select the track you want to edit or delete.
3. Select to change the name or color of the track, or select
to delete the track.
From the Navigation or Perspective 3D chart, select >
> > .
—select , , or .
• —does not record a track log.
• —records a track log until the track memory is full.
• —continuously records the track log, replacing the oldest track data
with new data.
—denes the frequency at which the track plot is recorded.
Recording more-frequent plots is more accurate but lls the track log faster.
• —sets whether the interval is determined by distance, time, or
resolution. (Select to set the value.)
• —records the track based on a distance between points.
• —records the track based on a time interval.
• —records the track plot based on a variance from your course.
This setting is recommended for the most-efcient use of memory. The
distance value () is the maximum error allowed from the true
course before recording a track point.
• —sets the value of the interval.
—sets the color of the track plot.
To Next Page
Loading...
