Garmin GTN 650Xi Series User Manual

3-66 Pilot’s Guide 190-02327-03 Rev. C
Navigation
Create a User Waypoint
OPEN CREATE USER WAYPOINT PAGE
From Map:
Home > Map > select any non-waypoint location > Map Pointer/Create Waypoint
From Waypoint Info:
Home > Waypoint Info > Create Waypoint
ASSIGN POSITION VALUES
From the Create User Waypoint page:
1. Tap Position > LAT/LON > Latitude/Longitude > specify the waypoint’s
coordinates > Create.
OR
1. Hold and drag the basemap until the user waypoint icon appears over the
desired location.
2. Tap Create.
MODIFY DEFAULT SETTINGS
Modify default settings as necessary.
• Create a custom identifier: Tap Use
r Identifier and enter a new one.
• Add a comment: Tap Comment and enter the appropriate text.
• If the waypoint is an airport: Tap Airport > Elevation, then specify the
number of feet.
• If the waypoint is for temporary use: Tap Temporary.
Once all modifications are complete, tap Create.

Garmin GTN 650Xi Series Specifications

General

Touchscreen	Yes
WAAS Capable	Yes
Connectivity	RS-232, USB
Operating Temperature	-20°C to +55°C
Certifications	TSO-C146c, TSO-C157a
GPS Receiver	High-sensitivity WAAS GPS receiver
Power Requirements	14 W (typical)