Garmin GTN 650Xi Series User Manual

Navigation
190-02327-03 Rev. C Pilot’s Guide 3-87
OBS
SUSPEND/UNSUSPEND
The Omni Bearing Selector (OBS) allows you to select between
manual or automatic sequencing of waypoints.
When active, this function allows you to set the
desired course To/From a waypoint using the
provided controls or with an external OBS selector
on HSI or CDI.
1. Tap OBS.
2. Specify a heading course.
CDI indicates the OBS heading.
The mode displays on the
annunciator bar.
The unit retains the active To
waypoint as a navigation
reference even after passing
the waypoint (i.e., prevents
sequencing to the next
waypoint).
Tapping the key again resumes
automatic sequencing of
waypoints (normal mode).
OBS Mode
SUSP
This key displays for leg types that
do not support OBS.
UNSUSP
This key displays for legs that
auto suspend (e.g., leg holds,
missed approaches).

Garmin GTN 650Xi Series Specifications

General

Touchscreen	Yes
WAAS Capable	Yes
Connectivity	RS-232, USB
Operating Temperature	-20°C to +55°C
Certifications	TSO-C146c, TSO-C157a
GPS Receiver	High-sensitivity WAAS GPS receiver
Power Requirements	14 W (typical)