Navigation
Viewing and Editing Your Saved Locations
TIP: You can save a location from the controls menu (Controls, page58).
1 From the watch face, press GPS.
2 Select Navigate > Saved Locations.
3 Select a saved location.
4 Select an option to view or edit the location details.
Saving a Dual Grid Location
You can save your current location using dual grid coordinates to navigate back to the same location later.
1 From any screen, hold GPS.
2 Press GPS.
3 If necessary, press DOWN to edit location information.
Setting a Reference Point
You can set a reference point to provide the heading and distance to a location or bearing.
1 Select an option:
• Hold CTRL.
TIP: You can set a reference point while you are recording an activity.
• From the watch face, press GPS.
2 Select Reference Point.
3 Wait while the watch locates satellites.
4 Press GPS, and select Add Point.
5 Select a location or bearing to use as a reference point for navigation.
The compass arrow and distance to your destination appear.
6 Point the top of the watch toward your heading.
When you deviate from the heading, the compass displays the direction from the heading and degree of
deviation.
7 If necessary, press GPS, and select Change Point to set a different reference point.
Navigating to a Destination
You can use your device to navigate to a destination or follow a course.
1 From the watch face, press GPS.
2 Select an activity.
3 Hold MENU.
4 Select Navigation.
5 Select a category.
6 Respond to the on-screen prompts to choose a destination.
7 Select Go To.
Navigation information appears.
8 Press GPS to begin navigation.
84 Navigation
To Next Page
Loading...
