CS 5000
User Manual
© 2009 GARRETT METAL DETECTORS 10 PN 1530100 REV H
2.3.3 BATTERY PACK MODULE (OPTIONAL)
This module, which includes two (2) 12v batteries and charging circuitry that comprise the optional battery
pack, will be stored behind this cover and connected with the Controller Module. This pack has a switch
which is used to disconnect battery power.
This switch need be placed in the OFF position only during storage or when the unit is not being used and
is not connected to AC power for more than 24 hours. See Section 11.6.1 for installation instructions.
POWER
CABLE B
BATTERY PACK MODULE
(OPTIONAL)
CONTROLLER MODULE
POWER SUPPLY MODULE
CABLE A
POWER CORD OR CORD SET
To Next Page
Loading...
