Garrett CS 5000 - Page 23

CS 5000
User Manual
©2009 GARRETT METAL DETECTORS 23 PN 1530100 REV H
8.11 REGULATORY INFORMATION
The unit also complies with IEC standards for Safety Requirements for Electronic Measuring
Apparatus and meets the Federal Communications Commission Class B standards for noise emis-
sion from commercial electrical equipment. It also conforms to the European Electromagnetic
CompatibilityDirective,89/336/EEC-EN55011,Group2,ClassB;-EN50082-1.
8.12 WEATHERPROOFING/FOREIGN OBJECT PROTECTION STANDARDS:
Meets IP 31, IEC Standard 529, Degrees of Protection Provided by Enclosures.
8.13 INTERFERENCE REJECTION
100% sensor coil Faraday shielding. DSP(Digital Signal Processor) automatically suppresses or
eliminates most noises associated with x-ray devices, video monitors and communications equipment,
such as radios and walkie talkies. RFI-EMI filters provideattenuation from 10 MHz to 1000 MHz.
8.14 SYNCHRONIZATION
Multiple frequencies permit several CS 5000s to operate simultaneously in close proximity.
8.15 ELECTRICAL
Fully automatic100to240VAC, 50 and 60 Hertz, 55watts;norewiring,switching or adjustments
required. Power supply meets UL, CSA, and TUV standards. Also complies with IEC standards for
Safety Requirements for Electronic Measuring Apparatus and meets the Federal Communications
Commission Class B standards for noise emission from commercial electrical equipment.
8.16 DIMENSIONS
  Width: 30” (0.76m) / Height: 80” (2 m) / Depth: 23” (0.57m)
  Width: 35” (0.9m) / Height: 87” (2.2m) / Depth: 23” (0.57m)
 Shipping: Width: 33.5” (85.1cm) / Height: 91.5” (223.4cm) / Depth: 6.25”
(15.9cm) / Weight: 129 lbs. (58.6 kg)
  Notlimitedbyelectronics;50-60detections/minuteisreasonable.
 Remoteoperatingcapability(indicatorsand/orconsole);battery
   back-upmodule(built-inforportability);Magnadolly(foreasy
movement of assembled unit).