GASLAND chef Pro Series

Other manuals for GASLAND chef Pro Series

Installation Instructions52 pages

Installation Instruction48 pages

Questions and Answers:

A
andrew52Sep 3, 2025
What to do if there is a failure of the oven door circuit in my GASLAND chef Pro?
- B
  Bonnie StevensSep 3, 2025
  If you are experiencing a failure of the oven door circuit in your GASLAND chef Oven, the door status detection switch may be damaged, or there may be a poor connection with the door detection switch wire group plug and the connector on the circuit board, or poor contact of switch S1, or the circuit board may be damaged. Replace the switch, the connector, or the circuit board.
S
Susan MoraSep 2, 2025
What causes the main circuit board of GASLAND chef Pro Oven to not detect the temperature sensor?
- S
  Sheri LindseySep 2, 2025
  If the main circuit board of your GASLAND chef Oven cannot detect the temperature sensor, the temperature sensor may be damaged, or there might be poor contact between the temperature sensor and the connector on the circuit board, or the IC at the IC5 position of the circuit board may be damaged. Replace the temperature sensor, the connector, or the control board.
L
Lisa CrossSep 1, 2025
Why does my GASLAND chef Oven smell like it's burning?
- A
  allen94Sep 1, 2025
  If you detect a burning or oily odor coming from the vent of your new GASLAND chef Oven, this is normal and will disappear over time. To speed up the process, set a Self-clean cycle for a minimum of 3 hours.
J
josephorrAug 31, 2025
How to fix a blank display on my GASLAND chef Pro?
- P
  Patricia GrayAug 31, 2025
  If your GASLAND chef Oven display goes blank, a fuse in your home may be blown, or the circuit breaker tripped. Replace the fuse or reset the circuit breaker.
A
Alex MillerAug 30, 2025
Why won't my GASLAND chef Pro Self-clean?
- L
  Lisa SmithAug 30, 2025
  If your GASLAND chef Oven will not Self-clean, ensure the oven has cooled down sufficiently before starting the cycle and then reset the controls. Also, a Self-clean cycle cannot be started if the oven lockout feature has been activated, so deactivate the oven lockout.
R
Richard JarvisAug 29, 2025
Why is food not broiling properly in my GASLAND chef Oven?
- G
  Greg WardAug 29, 2025
  If food is not broiling properly in your GASLAND chef Oven, make sure the serving size is appropriate. Ensure the rack is properly positioned and that you are using suitable cookware.
F
Frank GuerraAug 28, 2025
Why is food not baking properly in my GASLAND chef Pro?
- V
  Victoria EnglishAug 28, 2025
  If your GASLAND chef Oven is not heating or roasting food properly, it might be due to incorrect oven control settings.
M
Michael PetersonAug 27, 2025
Why is my GASLAND chef Oven smoking during Self-clean?
- P
  Patrick WoodsAug 27, 2025
  If you notice excessive smoking during a Self-clean cycle in your GASLAND chef Oven, touch Cancel to stop the cycle. Open the windows to ventilate the room. Once the cycle is cancelled, wipe up the excessive soil, and then restart the Self-clean cycle.
L
Linda SimsAug 26, 2025
Why is my GASLAND chef Pro Oven not clean after Self-clean?
- N
  Natalie BrooksAug 27, 2025
  If your GASLAND chef Oven is not clean after running a Self-clean cycle, make sure the oven controls were set correctly. Before starting the Self-clean cycle, wipe up any heavy spillovers. If the oven is heavily soiled, you may need to run the Self-clean cycle again or for a longer period.
M
Melissa FieldsAug 25, 2025
What to do if GASLAND chef Pro door is locked?
- B
  bergerpatrickAug 26, 2025
  If your GASLAND chef Oven door is locked, and there was a tripped circuit breaker or power failure while the door was locked, activate Control Lockout, and then unlock the control.