22 Maintaining and Troubleshooting Your E-3200 System
8.
Place the bootable diskette containing the BIOS files into drive A.
9.
Reconnect the power cord and turn on the system to recover the BIOS.
When you hear two beeps, the BIOS has been successfully recovered.
10.
Turn off the system again, eject the diskette from drive A, and
disconnect the power cord.
11.
Open the case, observing the “Static Electricity Precautions” on
page 2.
12.
Place the jumper back on pins 1-2 on the J5G1 jumper.
13.
Close the case, as described in Chapter 1.
14.
Reconnect the power cord and turn on the system.
To Next Page
Loading...
