vi Maintaining and Troubleshooting Your E-3200 System
•
There is a danger of explosion if the complementary metal-oxide
semiconductor (CMOS) battery is replaced incorrectly. Replace
the battery with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the
manufacturer’s instructions.
•
Unplug the system from the wall outlet and refer servicing to
qualified personnel if:
•
The power cord or plug is damaged.
• The power cord or plug is damaged.
• Liquid has been spilled into the system.
• The system does not operate properly when the operating
instructions are followed.
• The system was dropped or the cabinet is damaged.
• The system’s performance changes.
To Next Page
Loading...
Need help?
General
