GAUI X4 - Page 13

6
GAUI
TAI SHIH HOBBY CORPORATION
Lower frame assembly
下側板組裝
GAUI
TAI SHIH HOBBY CORPORATION
Frame assembly
機身組裝
螺絲均需上止滑劑
All screws on side plates should
be applied with thread lock.
螺絲均需上止滑劑
All screws on side plates should
be applied with thread lock.
M2x4.6
M2x4.6
M2x4.6
M2x4.6....................x3
組裝(艙罩支柱)時先將M3x25螺絲鎖入
支柱內，在使用直徑2以下的圓棒插入
孔內並旋緊艙罩支柱。
When assembling the canopy posts, fix
the M3x25 screw inside the post, use a
2mm hex screwdriver as a tool to tighten
the canopy posts.
M3x25
M3x22
M3x22
M3x22
下側板塑膠墊
(10mm)
Frame post
圓鋁柱
下側板墊片
M3x22......................x3
M3x25......................x1
Lower frame spacer
Lower frame plastic spacer
10
11