GE Interlogix Aritech CS250 User Manual

CS250 User Manual
12
This allows individual zones to be explicitly excluded from arming. This can be useful if a zone is misbehaving and is likely to cause a false alarm. You
must perform the inhibiting before you arm the system. For security reasons, the inhibited zones are automatically uninhibited each time the system is
disarmed.
1 Enter the user code. ..........
2 Press the down arrow. ................................................................
3 Press OK. ....................................................................................
4 Press OK. Any inhibited zones are displayed. ............................
5 Enter the zone number that you want to inhibit followed by #.
 Inhibiting zones should never be a regular procedure. It is provided to ensure that as much of your premises as possible can be protected during
temporary fault conditions. Contact your installer so that the fault can be corrected.
INHIBITING (EXCLUDING) ONE OR MORE ZONES
User Menu
Arm Options
User Menu
Inhibits
Inhibits
Inhibit Zone
Enter Code
****
Inhibit Zone
None
Inhibit Zone
Zone 1

GE Interlogix Aritech CS250 Specifications

General

Brand	GE Interlogix
Model	Aritech CS250
Category	Keypad
Language	English