CS250 User Manual
24
Perform a bell test to ensure that the external bell is working.
1 Enter the user code. ..........
2 Press the down arrow 6 times. ...................................................
3 Press OK. ....................................................................................
4 Press the down arrow 5 times. ...................................................
5 Press OK. The bell sounds for 3 seconds on and 1 second
off, until you press NO. ................................................................
PERFORMING A BELL TEST
User Menu
Arm Options
User Menu
Diagnostics
Diagnostics
Zone Tests
Enter Code
****
Diagnostics
Ext Bell Test
Ext Bell Test
To Next Page
Loading...