CS250 User Manual
25
The event log displays the events since the system was last armed or disarmed. There can be up to 317 events in the event log.
1 Enter the user code. ..........
2 Press the down arrow 4 times. ...................................................
3 Press OK. Use the navigation keys to go through events.
Each event has two screens of information. Press 0 to toggle
between the screens for additional information on the event.
This example shows a Burglary A alarm that was activated in zone 9
(named 'Upstairs') in area 1.The event occurred on Wednesday
1st January at 17:32. This is the 28
th
event in the log.
Event Log description
The event log screens contain detailed information. Use the sample event codes
below to interpret each part of the log description.
READING THE EVENT LOG
User Menu
Arm Options
User Menu
Event Log
Burglary A
028 Act 09 0 A1
Enter Code
****
Upstairs Area 1
Wed 01 Jan 17:32
Burglary A
028 Act 09 0 A1
Upstairs Area 1
Wed 01 Jan 17:32
Event type
XXX BBB YY Z CCC
DDDDDDDDD EEEEEEE
Day DDD MMM hh: mm
Sample event as displayed on screen
Sample event codes
Description of sample event codes
XXX Log index number. This is an updated rolling log and the most
recent event is number 1.
BBB Activation (Act) or restoration (Res).
YY Zone, user or event type number with associated data on the
event - see the CS250 Installation Manual for more details.
Z Part arm status. 0 =Not a part arm event. 1 = Part arm 1 is
active. 2 = Part arm 2 is active.
CCC Area. A1 = Area 1 A2 = Area 2 Sys = System Cmn = Common
Area.
DDDDDDDDD User or zone name.
EEEEEE Area name.
Day Day of the week.
DDD Day in the month.
MMM Month.
hh Hours.
mm Minutes.
To Next Page
Loading...
Need help?
General
