GE Interlogix Aritech CS250 User Manual

CS250 User Manual
18
You must have the super user code to change other people’s codes. It is important to change the default user code as soon as the system is installed.
1 Enter the user code. ..........
2 Press the down arrow 7 times. ...................................................
3 Press OK. ....................................................................................
4 Press OK. ....................................................................................
5 Use the navigation keys to select
the user and then press OK. .......................................................
6 Press OK. ....................................................................................
7 Enter the new user code and press OK. .....................................
8 Enter the code again and press OK. ...........................................
CHANGING USER CODES
Enter Code
****
Confirm Code
****
User Detail 1
****
User Detail 1
__
User Detail 1
New Code
User Codes
User 1 U01
Users
User Codes
User Menu
Users
User Menu
Arm Options

GE Interlogix Aritech CS250 Specifications

General

Brand	GE Interlogix
Model	Aritech CS250
Category	Keypad
Language	English