GE Interlogix Aritech CS250 User Manual

CS250 User Manual
17
When a fire zone is activated, it causes a fire alarm even if the system is disarmed. A user code or keyfob is required to disarm the system. The fire
zone must then be explicitly reset. If smoke is still present, you must wait and reset the detector again when the smoke clears. The system cannot be
armed until the fire zone has been restored and reset.
1 Enter the user code. ..........
2 Press the down arrow 8 times. ...................................................
3 Press OK. ....................................................................................
4 Press the down arrow. ................................................................
5 Press OK. The keypad beeps to indicate an update.
 It can be useful to set this up as a function key.
User Menu
Arm Options
User Menu
System Settings
System Settings
Function Keys
Enter Code
****
System Settings
Reset Fire
RESETTING FIRE DETECTORS

GE Interlogix Aritech CS250 Specifications

General

Brand	GE Interlogix
Model	Aritech CS250
Category	Keypad
Language	English