CS250 User Manual
13
If a zone has been tampered with, you can inhibit the zone to arm the system. The zone remains unprotected.
1 Enter the user code. ..........
2 Press the down arrow. ................................................................
3 Press OK. ....................................................................................
4 Press the down arrow. ................................................................
5 Press OK. Any inhibited zones are displayed. ............................
6 Enter the zone number that you want to inhibit followed by #.
INHIBITING TAMPERED ZONES
User Menu
Arm Options
User Menu
Inhibits
Inhibits
Inhibit Zone
Enter Code
****
Inhibits
Inhibit Zon Tam
Inhibit Zon Tam
None
Inhibit Zon Tam
1 Zone 1
To Next Page
Loading...