GE Interlogix Aritech CS250 User Manual

CS250 User Manual
23
This shows any faults with the system.
1 Enter the user code. ..........
2 Press the down arrow 6 times. ...................................................
3 Press OK. ....................................................................................
4 Press the down arrow. ................................................................
5 Press OK. Any system faults are displayed.
In this example the battery is flat.
 If a mains fault occurs, while the system is disarmed, the trouble LED and power LED flash quickly and the keypad buzzer sounds for 30
seconds. Pressing any key stops the buzzer. If line fault occurs, while the system is disarmed, the power LED does not flash but the keypad buzzer
may sound for 30 seconds. Pressing any key stops the buzzer.
Select Diagnostics>System Status to check the system state and determine the cause of the fault.
VIEWING SYSTEM FAULTS
User Menu
Arm Options
User Menu
Diagnostics
Diagnostics
Zone Tests
Enter Code
****
Diagnostics
System Faults
System Faults
Fuse Ft Battery

GE Interlogix Aritech CS250 Specifications

General

Brand	GE Interlogix
Model	Aritech CS250
Category	Keypad
Language	English