GE 60-806-95R-16Z - Security Concord Express System Control Panel User Manual

Programming the Panel
25
The following describes how to program the phone settings that appear under PAGER PHONE 1-3.
Reporting Format (0105-cs phone 1, 0115-cs phone 2)
Phones-CS Phone 1-2 (Default=all CID)
This setting determines whether the panel uses the SIA or CID (Contact ID)
reporting format for central station communication.
¾
To select SIA or CID Reporting Format:
1. With the display showing REPORTING FOR-
MAT SIA/CID (current setting), press 1 (for
SIA) or
2 (for CID). The display flashes
the entered setting.
2. Press
ƒ and the display shows the new set-
ting.
Phone Number (0120-pager 1, 0130-pager 2, 0140-pager 3)
Phones-Pager Phone 1-3 (Default=none)
This setting is used for programming a phone number that communicates to
a pager. Phone numbers can be 1-24 digits long, and can include pauses or *
and # characters.
To enter pauses, press
C. To enter *, press and hold 7 for one second. To
enter #, press and hold
9 for one second.
Note
Call-waiting services should be disabled to prevent interruptions to panel commu-
nication to the central monitoring station (or pager). To program a dialing prefix
that disables call-waiting, see the Call Wait Cancel setting under the menu
PHONE
OPTIONS—GLOBAL
.
¾ To program a Pager Phone Number:
1. With the display showing PHONE NUMBER _
(or current number), enter the desired pager
phone number including pauses. The dis-
play flashes the entered number.
2. Press
ƒ and the display shows the new
number.
¾
To delete a Pager Phone Number:
1. With the display showing PHONE NUMBER _
(current number), press
D. The display
shows
PHONE NUMBER _.
High Level Rpts (0121-pager 1, 0131-pager 2, 0141-pager 3)
Phones-Pager Phone 1-3 (Default=on)
When this setting is on, the panel reports to the pager events that involve a
high-level security risk, including the following conditions:
• Fire, Police, Auxiliary, Duress, and Freeze alarms
• No Activity
• Receiver Failure (or jam)
• System Tamper (40 incorrect keystrokes or touchpad supervisory),
• Entering or exiting Sensor Test mode
¾
To turn High-Level Reports off or on:
1. With the display showing HIGH LEVEL RPTS
OFF/ON (current setting), press 1 (off) or 2
(on). The display flashes the entered setting.
2. Press
ƒ and the display shows the new set-
ting.
Low Level Rpts (0122-pager 1, 0132-pager 2, 0142-pager 3)
Phones-Pager Phone 1-3 (Default=off)
When this setting is on, the panel reports non-alarm conditions to the pager,
including the following conditions:
• Force Armed
• Hardwire Zone Trouble (open or short)
• Supervisory (wireless devices)
• Low Battery (wireless devices)
• Other non-alarm related conditions
¾
To turn Low-Level Reports off or on:
1. With the display showing LOW LEVEL RPTS
OFF/ON
(current setting), press 1 (off) or 2
(on). The display flashes the entered setting.
2. Press
ƒ and the display shows LOW LEVEL
RPTS OFF/ON (new setting).

GE 60-806-95R-16Z - Security Concord Express System Control Panel Specifications

General

Brand	GE
Model	60-806-95R-16Z - Security Concord Express System Control Panel
Category	Security System
Language	English