Programming the Panel 26
The following describes how to program the phone settings that appear under DOWNLOADER
PHONE.
Phone Options Menu
The PHONE OPTIONS menu lets you set up system phone access and communications that affect
the whole system (global) or a specific partition.
The following describes how to program the phone option settings that appear under
GLOBAL.
Open/Close Rpts (0123-pager 1, 0133-pager 2, 0143-pager 3)
Phones-Pager Phone 1-3 (Default=off)
When this setting is on, the panel sends a report when the system is armed
(closed) or disarmed (opened).
Note
To use this feature, the Opening Reports and Closing Reports settings under the
REPORTING menu must be turned on.
¾ To turn Opening/Closing Reports off or
on:
1. With the display showing OPEN/CLOSE RPTS
OFF/ON (current setting), press 1 (off) or 2
(on). The display flashes the entered setting.
2. Press
ƒ and the display shows the new set-
ting.
Latchkey Rpts (0124-pager 1, 0134-pager 2, 0144-pager 3)
Phones-Pager Phone 1-3 (Default=on)
This setting determines whether or not the panel reports to a pager when the
system is disarmed by using the latchkey modifier (
6) and latchkey desig-
nated access code.
¾
To turn Latchkey reports off or on:
1. With the display showing
LATCHKEY
REPORTS OFF/ON
(current setting), press 1
(off) or
2 (on). The display flashes the
entered setting.
2. Press
ƒ and the display shows the new set-
ting.
Streamlining (0125-pager 1, 0135-pager 2, 0145-pager 3)
Phones-Pager Phone 1-3 (Default=on)
This setting determines whether the panel includes (off) or excludes (on) the
account number when reporting to a pager.
¾
To turn Streamlining off or on:
1. With the display showing
STREAMLINING
OFF/ON
(current setting), press 1 (off) or 2
(on). The display flashes the entered setting.
2. Press
ƒ and the display shows the new set-
ting.
Phone Number (0150)
Phones-Downloader (Default=none)
This setting is used for entering the phone number of a computer used for pro-
gramming the panel from off-site. Phone numbers can be 1-24 digits long,
including pauses or * and # characters. To enter pauses, press
C. To enter *,
press and hold 7 for one second. To enter #, press and hold 9 for one second.
Note
Call-waiting services should be disabled to prevent interruptions to panel communi-
cation to the central monitoring station (or pager). To program a dialing prefix that
disables call-waiting, see the Call Wait Cancel setting under the menu
PHONE
OPTIONS—GLOBAL
.
¾ To program a downloader phone num-
ber:
1. With the display showing
PHONE NUMBER
(current number), enter the desired phone
number. The display flashes the entered
number.
2. Press
ƒ and the display shows the new set-
ting.
¾ To delete a downloader phone number:
1. With the display showing
PHONE NUMBER _
(current number), press
D. The display
shows PHONE NUMBER _.