GE Amersham Typhoon - Preparing the Sample

6.2 Preparing the sample
About this section
This section describes how to prepare the samples for a scan. This section is divided in
three subsections for the three different scanning modes:
1
Fluorescence
2
Phosphor imaging
3
Densitometry
Luminescent samples can also be scanned using the Dark Scan default method
in the fluorescence scanning mode.
Note:
In this section
See pageSection
1046.2.1 Preparing a sample for fluorescence imaging
1096.2.2 Preparing a sample for phosphor imaging
1166.2.3 Preparing a sample for densitometry
Precautions
CAUTION
Always wear gloves, protective glasses and a lab coat or similar
when handling samples.
CAUTION
Handle the sample stages and the digitization plate with care to
avoid dropping them.
Amersham Typhoon Operating Instructions 29193226 AC 103
6 Operation
6.2 Preparing the sample