NOTICE
•
Do not scratch or bend the storage phosphor screen.
•
Keep the storage phosphor screen free from dust.
NOTICE
Protect the storage phosphor screen from water and volatile sol-
vents.
•
Dry the sample thoroughly before exposing it.
•
Wrap wet samples in plastic film and make sure that no liquid
exits. Use double layers if the sample contains volatile solvents.
•
If water enters the storage phosphor screen, the sensitivity of
the storage phosphor screen is reduced.
•
Volatile solvents may deform the protective film on the storage
phosphor screen.
NOTICE
Protect exposed storage phosphor screens from light until the
scanning is finished.
Required tools and materials
•
Storage phosphor screen cassette
•
Radioisotope-labeled samples
•
Gloves
•
Plastic film
•
Soft, lint-free tissues
110 Amersham Typhoon Operating Instructions 29193226 AC
6 Operation
6.2 Preparing the sample
6.2.2 Preparing a sample for phosphor imaging
To Next Page
Loading...