GE Amersham Typhoon - Page 14

Regulations and standards,
products containing lasers
DescriptionRegulation / Standard
Safety of laser productsEN/IEC 60825-1
Safety of laser productsUSA 21 CFR, Chapter I,
Subchapter J, Part
1040.10 Laser Products
This instrument is a class 1 Laser Product (IEC60825-1/EN60825-1). This instrument
meets the laser radiation safety requirements specified in the Code of the Federal Reg-
ulations (21 CFR, Chapter 1, Subchapter J).
CLASS 1
LASER PRODUCT
EN60825-1 : 2014
CLASS 1
LASER PRODUCT
IEC60825-1:2014
The following lasers can be installed in the Amersham Typhoon scanner:
Maximum powerOperating powerWavelengthLaser and class
70 mW25 mW (CW)488 nmLD laser, class 3B
80 mW10 mW (CW)532 nmSHG laser, class 3B
220 mW84 mW (CW)635 nmLD laser, class 3B
290 mW50 mW (CW)685 nmLD laser, class 3B
230 mW100 mW (CW)785 nmLD laser, class 3B
The beam divergence of all laser modules is collimated.
Note:
Different lasers are installed depending on the configuration, see Main components in
Amersham Typhoon scanner, on page 132.
14 Amersham Typhoon Operating Instructions 29193226 AC
1 Introduction
1.3 Regulatory information
1.3.5 Other regulations and standards