Using the probe. GEAppliances.com
For many foods, especially roasts and poultry, internal food temperature is the best test for doneness.
The temperature probe takes the guesswork out of roasting by cooking foods to the exact aloneness you want.
Itl
_i_!I
The temperature probe has a
skewer-like probe at one end and a
plug at the other end that goes into
the outlet in the oven.
Useofprobes otherthan the one providedwith
.....
this product may resultin damageto the probe, lug
Usethe handles ofthe probe and plug when
inserting and removing them from the food and Pr!bI
outlet.
Toavoid damaging your probe, do not use
tongs to pull on the cablewhen removing it. Neverleave your probe insidethe oven
Toavoid breaking the probe,make sure food during a self-cleaning cycle.
iscompletely defrosted before inserting. Do not store the probe in the oven.
Toprevent possible burns, do not unplug the
probe from the outlet until the oven
has cooled.
After preparing the meat and placing it on
a trivet or on a broiler pan grid,follow these
directions for proper probe placement.
Insertthe probe completely into the meat.
It should not touch the bone,fat or gristle.
Forroasts with no bone, insertthe probe into
the meatiest part of the roast. Forbone-in ham
or lamb, insert the probe intothe center of the
lowest large muscle.
Insertthe probe into the center of dishes such
as meat loaf or casseroles.
Insertthe probe into the meatiest part of the
inner thigh from below and parallel to the leg of
a whole turkey.
®@®@@
@®®®@
®®®@@
®®@®@
@
@
How to Set the Upper Oven For Roasting When Using the Probe
[Z] Insertthe probe into the food.
[] Plugthe probe into the outlet in the oven.
Make sure it'spushed all the way in.Close
the oven door.
r-_ Touch the PROBEpad.
r_ Touch the number pads to set the desired
internal food or meat temperature.
[-_ Touch the BAKEpad.
[-_ Touch the number pads to set the desired
oventemperature.
[_] Touch the STARTpad.
Thedisplay will flash if the probe is inserted
into theoutlet andyou have not set a probe
temperature and touched theSTARTpad.
After the internal temperature of the food
reaches IO0°F,the changing internal
temperature will be shown in the display.
%
When the internal temperature of the food
reaches the number you have set,the
probe and the oven turn off and the oven
control signals.To stop the signal, touch
the CLEAR/OFFpGd.Usehot pads to
remove the probe from the food. Do not
usetongs to pull on it-they might
damage it.
To change the oven temperature during the
Roastcycle,touch the BAKEpad and then the
number padsto set the new temperature.
Ifthe probe isremoved from the food before
the final temperature is reached, a tone will
sound and the display will flash untilthe
probe is removed from the oven.
You can usethe timer even though you
cannot usetimed oven operations while
usingthe probe.
19
To Next Page
Loading...
