GE Appliances Quickset III User Manual

Using the clock and timer.
Not all features are on all models.
57 lock 6¸¸¸¸¸¸¸:!t
FStart-'_
LonJ
Hake sure the clock is set to the
correct time of day.
To Set the Clock
Theclock must be set to the correct time
of day for the automatic oventiming functions
to work properly,Thetime of day cannot be
changed during a delayedcooking or a delayed
self-cleaning cycle,
ry] Touch the Clock pad twice.
Formodels without a Clock pad:
Holdthe + and - pads for 3 seconds.
Touch the + or - pads.
Ifthe + or - pads are not touched within one
minute after Step !, the display revertsto the
original setting. If this happens, repeat Step 1
and reenter the time of day.
r_ Touch the Start/On pad until the time of
day shows in the display. Thisenters the
time and starts the clock.
Tocheck the time of day when the display is
showing other information, simply touch the
Clock pad.Thetime of day shows until another
pad is touched.
To Turn Off the Clock Display
If you hoveseveral clocks in your kitchen,you
may wish to turn off the time of day clock display
on your range.
[Z] Touch the Clock pad once to turn off the
time of day display. Although you will not be
able to see it, the clock maintains the
correct time of day.
[] Touch the Clock pad twice to recall the
clock display.
Formodels without a Clock pad:
[Z] Touch the Bakeand Broil Hi/Lo pads at the
same time untilthe display shows SF.
Touch the Timer pad. The display will show
ON(Clockdisplay on).Touch the Timer pad
again until the display shows OFF(Clock
display off).
r3] Touch the Start/On pad to leave the control
set in this mode.
NOTE:If the clock cannot be recalled or itwill not
stay permanently displayed,the EnergySaver
Hode feature ison.Toturn the feature off, see
the EnergySaverHode section.
o
jrKitchen--"]
l_imer_
On/Off
Start--_
LOn J
Thetimer s a minutetimer only,
TheClear/Off pad doesnot affect
the timer.
To Set the Timer
The timer does not control oven operations.
The maximum setting on the timer is 9 hours and
59 minutes.
[] Touch the Kitchen Timer On/Off pad.
r_ Touch the + or - pads until the amount of
time you want shows in the display. The
maximum time that can be entered in
minutes is59.Timesmore than 59 minutes
should be changed to hours and minutes.
Ifyou make a mistake, touch the Kitchen Timer
On/Offpad and begin again.
[] Touch the Start/On pad. The time will start
counting down, although the display does
not change until one minute has passed.
[] When the timer reaches :000,the control will
beep 3 times followed by one beep every 6
secondsuntil the Kitchen Timer On/Off pad
istouched.
16
To Reset the Timer
Ifthe display isstill showing the time remaining,
you may change it by touching the Kitchen
Timer On/Off pad,then touching the + or - pads
until the time you want appears in the display.
If the remaining time is not in the display (clock,
start time or cooking time are in the display),
recallthe remaining time bytouching the
Kitchen Timer On/Off pad and then touching the
+ or - pads to enter the new time you want.
To Cancel the Timer
Touch the Kitchen Timer On/Off pad twice.

GE Appliances Quickset III Specifications

General

Brand	GE
Model	Appliances Quickset III
Category	Ranges
Language	English