GE ASTAT XT QT 0008U Series - Display Mode - Page 0

26 • Control Keypad
4.7.1 Display Mode
17
– Page 0
18
Function &
Default
Unit Description
Motor Current
0
A Displays operating current of the motor.
ASTAT-XT’s Default Display. After pressing the Mode or Select keys, a time
delay is initiated. Following the delay the LCD returns to display Motor
Current.
If current is lower than 0.1 of the rated current of the ASTAT-XT, the display
will show: I < 0.1 Ir
Line Voltage
0 Volt
V Displays the mains voltage.
Thermistor Input
3.1 Kohm
Kohm Displays the resistance level of the motor’s thermistor.
17
Displays in MINIMIZED MODE and MAXIMIZED MODE.
18
Parameters cannot be programmed in page 0.