GE MEDICAL SYSTEMS CT 9800 QUICK SYSTEM MANUAL
Rev. 1 Direction 18000
i-A-1
HOW TO USE THE 9800 MANUALS
The CT9800 service manual set has been designed to aid in rapidly locating service information. The following
pages describe the overall manual structure and where information regarding installation, tests, jumper settings,
calibration, etc. may be found.
IMPORTANT: If you have found errors in any of the service manuals or have suggestions as to additional
content, use the “Report on Technical Publications” form located in the front of each service
manual. Your feedback is important.
The manual structure is divided into “SYSTEM” and “Subsystem” manuals. The System Manuals contain
information relative to system installation and service, and also serve as a steering document to guide you from a
system test to a subsystem test, for example. Each subsystem manual contains information that pertains to that
specific subsystem. Therefore, while troubleshooting a system problem, you may also have one or several
subsystem manuals open also.
Generally, begin with the appropriate System manual chapter. If necessary, you will be guided to the appropriate
subsystem manual and chapter.
To Next Page
Loading...
