GE CT-9800

GE MEDICAL SYSTEMS CT 9800 QUICK SYSTEM MANUAL
Rev. 1 Direction 18000
i-A-3
The following chapters of the CT9800 Quick System Service manual are contained within the same binder.
Direction 18000 Procedural guideline of how to test each function within
CHAPTER 4 a 9800 system to verify system operation after
installation or service. Refers to subsystem manuals
Chapter 4 as necessary for subsystem testing. Also
contains Data Processing checks, load from cold
procedure, and Image performance checks.
SM 9800B Procedural guideline of how to adjust a complete 9800
CHAPTER 6 system. The guideline defines the sequencew of which
subsystem is adjusted first etc. on initial installation. The
Chapter 6 of subsystem manuals are referenced as
necessary. This chapter contains Data Processing
Adjustments, X-Ray Alignment, and Laser alignment.
SM 9800B Contains System interconnect, grounding, diagrams and
CHAPTER 7 hardware location (door diagrams) diagrams as well as the
schematic diagrams of the System Power Module,
Remote Control Station, and Over Temperature sensor.
SM 9800B Procedural guideline to aid in locating a failed
CHAPTER 8 subsystem. Also, System error messages are described
as well as Data Processing troubleshooting methods.
FUNCTIONAL
CHECK
FUNCTIONAL
CHECK
ADJUSTMENTS
SCHEMATICS
ADJUSTMENTSADJUSTMENTS
DIAGNOSTICS