GE CT-9800

GE MEDICAL SYSTEMS CT 9800 QUICK SYSTEM
Rev. 4 Direction 18000
4-1-9
SERVICE MANUAL REFERENCE
TEST NAME
Systems
Manufactured before
September 1985
Systems
Manufactured after
August 1985
CT-9800
QUICK
Systems
All manufactured
after August 1985
X-Ray Calibration SM 9803B; Ch 6; Sec 12 SM 9803B; Ch 6; Sec 12 Dir 18006; Ch 6; Sec 12
X-Ray Indicators SM 9803B; Ch 4; Sec 7 SM 9803B; Ch 4; Sec 7 Dir 18006; Ch 4; Sec 7
Beam Quality SM 9803B; Ch 3; Sec 3-4 SM 9803B; Ch 3; Sec 3-4 Dir 18006; Ch 3; Sec 3-4
X-Ray Alignment SM 9800B; Ch 6; Sec 9 SM 9800B; Ch 6; Sec 9 Dir 18000; Ch 6; Sec 9
ISO center SM 9800B; Ch 6;
Sec 9-6*
SM 9800B; Ch 6;
Sec 9-6*
Dir 18000; Ch 6; Sec 9-6
Beam on Window SM 9800B; Ch 6; Sec 9-5 SM 9800B; Ch 6; Sec 9-5 Dir 18000; Ch 6; Sec 9-5
2% SID ** SM 9800B; Ch 6;
Sec 9-9* **
Not Applicable Not Applicable
Scan increment Accuracy Not Applicable SM 9802B; Ch 4; Sec 6 Dir 18005; Ch 4; Sec 6
Alignment Light
Visualization
Not Applicable SM 9800B; Ch 4; Sec 9-4 Dir 18000; Ch 4; Sec 9-4
Scan Plane Reference Not Applicable SM 9800B; Ch 4; Sec 9-3 Dir 18000; Ch 4; Sec 9-3
Tube Output Check Not Applicable SM 9803B; Ch 4; Sec 7-1* Dir 18006; Ch 4; Sec 7-1
Quality Assurance Not Applicable SM 9800B; Ch 4;
Sec 12-11*
Dir 18000; Ch 4;
Sec 12-11
TABLE 4-1-4
H.H.S. FIELD TESTS FOR CT-9800 SYSTEMS
*Refer to CT 9600 SUPPLEMENT, Direction 17079, for modified test procedure.
** Test requirement discontinued November, 1986