GE CT-9800

GE MEDICAL SYSTEMS CT 9800 QUICK SYSTEM
Rev. 1 Direction 18000
8-3-15
NOTE: After many months of accumulating errors, it is possible to fill the disk so that RECON cannot occur
due to insufficient disk space. (Certain errors may also cause the disk to be filled quite rapidly with
error messages).
It is then necessary to delete older or extremely large error logs between software releases.
To old error logs may be deleted individually or all old logs may be deleted by:
R
DIR QDR
R
DELETE/V ERLG-.LG
Caution: When deleting error logs, NEVER delete the current log (CTEXER.LG) which is necessary for
CTEX to run. Deleting the current log may result in System Hang’s. Current log is
“CTEXER.LG”.