GE MEDICAL SYSTEMS CT 9800 QUICK SYSTEM
Rev. 1 Direction 18000
8-5-10
Bits Name Meaning when 1
13 Write Lock The tape on the selected transport is write-protected.
14 Odd Character The record just read or written contains an odd number of bytes.
15 Unit Ready The selected transport is ready.
For more information on programming DIA, & DIB type commands, refer to the Programmers Reference
Manuals, located in the S/140 Manual Volume #2, Parts 1 thru 3.
2. Diagnostic programs for the 6026 Mag Tape Drive are the reliability (6026 RELI) and diagnostic (6026
DIAG) programs. The reliability program runs the tape drive under worst-case conditions to force any
marginal errors to occur. The diagnostic tests for errors in a manner that helps to identify the cause of
the error.
Abstracts and operating instructions for these programs may be found in the DTOS Manual Volume #1,
Part 4. The normal use of the reliability program is described in Chapter 4 - Functional Checks in the CT
9800 Quick System Manual (Direction 18000).
To Next Page
Loading...
