D20/D200
Installation and Operations Guide
GE Energy
994-0078-2.00-7 General
22
Full
Familiarization, continued
WESTERM
D20M++
Termination
Panel
The D200 uses the WESTERM D20M++ Termination Panel. Up to four
D20ME/ME II boards can be connected to each Termination Panel.
Note
There are cases when you will need a second termination panel:
• If you have more than four main boards and you want to utilize at least one serial
communication port for each board
• If more than 28 serial ports are required
Contact GE Energy for further information.
Banks of RS-232 Serial
Communication Ports for
separate nodes
Power
Termination Block
Grounding Block
Ribbon cable connections
Ribbon cable connections
Ribbon cable connections
Ribbon cable connectors
D.20 Link Ports
To Next Page
Loading...
