1.0 Introduction
1.1 General
1.2 Keypad
The Pressure Calibrator is a microprocessor controlled, precision instrument powered by an internal 6V
rechargeable battery pack. It is portable and capable of accurate pressure measurement, voltage or current
measurements and sourcing when calibrating transducers, pressure switches, etc. This section describes the equipment
from an external viewpoint, allowing the user to become familiar with the various controls and connections provided.
The PC6-IDOS is housed in a painted metal
The Keypad is a non-tactile membrane keyboard with six buttons. The keyboard layout is shown below.
An audible tone accompanies
every key operation.
PC6-IDOS
case with a carry handle/stand, a liquid crystal display unit at the front and a
six button keyboard. The main body contains the circuitry, connections, internal transducer(s) and battery pack.
Note:
PRINT
LOG
ON/OFF
MENU
ENTER
ZERO
2Page
K0354, Iss. 1
To Next Page
Loading...
