SPECIFICATIONS / MAINTENANCE
Battery Life
Recharge Time
Low Battery
Dimensions (l: w: h)
Weight
Microprocessor
Recommended Recalibration Period
Electrical Connections
Pressure Media
Pressure Connection
Software (optional)
System requirements:Fully charged: up to 8 hours
1
14-16 hours for full charge
Continuous check, audio and visual warning
x 180 x 85 mm (7.9 x 7.1 x 3.3 in)
Approximately kg (4 lb)
H8S/2138
1 Year (Max)
Ground Standard 4 mm socket
Voltage/Current Input/Output Standard 4 mm sockets
Pressure Switch Input Standard 4 mm sockets
Battery 2 pole miniature round connector
RS232 8 pole miniature round connector
EPM (P2) 5 pole miniature round connector
Water, Mineral Oil, Non-corrosive gases
(for other media, contact GE).
‘quick-fit’ connector / 1/4”BSP or 1/4”NPT female
adaptors.
The ‘ ’ software will present
downloaded data in various graphical forms such
as gauges or a scrolling bar & remotely control
the PC6-IDOS via the RS232 cable linked to a
PC. The downloaded data can be stored in a
variety of file types compatible with most analysis
database and word processing programs.
Calibration procedures can be uploaded to the
PC6-IDOS.
200
1.8
Minimum Intel Pentium with Windows 95 or
higher.
1
The battery usage time specified here is heavily dependent upon the
functions selected. For instance, using the back-light function will
reduce the battery usage time, as will source mode functions.
Clean the case with a moist, lint-free cloth and a weak detergent. Do not
use solvents or abrasive materials.
Do not do local repairs. Return the equipment to the
manufacturer or an approved service agent.
Do not dispose of this product as household waste. Use an
approved organisation that collects and/or recycles waste
electrical and electronic equipment.
For more information, contact one of these:
• our customer service department
(Contact us at www.gesensing.com)
• your local government office
SiCal PRO
® ®
Ordering Codes:
Maintenance
Page vi
For Panel Mount version add a 'P' to the order code i.e.
PC6-BP-XXXX-XXXX-C-1. See page 61 for panel dimensions.
PC6 - B - XXXX - XXXX - C - 1
Range 1 (R1)
(R1 > R2)
C Ior (Calibrator or Indicator)
1 2 3 4-UK / -Europe / -USA / -AUS
Range 2 (R2)
(optional)
K0354, Iss. 1
To Next Page
Loading...
