DescriptionNo.DescriptionNo.
Select tube type and size3Select rack types1
Select tube type and size4Select fractionation order2
DescriptionNo.DescriptionNo.
Select fractionation bases2Select starting tubes1
It is also possible to set the delay volume, i.e., the added volume of tubing and components
between the UV flow cell in the ÄKTA system and Fraction Collector Frac-950. This value
must be changed when the ÄKTA standard configuration system is changed to an op-
tional configuration.
Collecting fixed fractions
Details about collecting fixed fraction volumes using UNICORN in a method are described
in the ÄKTA design Optional Configuration User Manual.
Collecting peak fractions
Details about collecting peaks only using Fraction Collector Frac-950 in a method are
described in the ÄKTA design Optional Configuration User Manual.
Frac-920 and Frac-950 Operating Instructions 28-9622-09 AC 41
4 Operation
4.3 Fraction Collector Frac-950
To Next Page
Loading...
